ETC Source Four Series 3 Lustr X8 Kit
Over a decade of research comes together for the market that has inspired ETC for over 45 years. The Source Four LED Series 3 brings the brightest light to the stage with the Lustr X8 array for the most nuanced colors and the Daylight HDR array for tunable white light. Get the brightness you need from every distance, the color you’ve been craving, and the control you deserve for the most efficient workflow.
With the eight-color Lustr X8 array, including the addition of Deep Red, Series 3 renders skin tones and sunsets with new depth. With the tunable white Daylight HDR array, you get a wider range of warm and cool whites. All, without sacrificing brightness. The Lustr X8 features two color arrays. One array for emotional colors and soft pastels and a second for the widest range of whites, for added depth to the colors. Designers know that the best white light is made of the richest colors which is why our tunable Daylight HDR redefines how you use white light.
With the introduction of Source Four LED Series 3, comes the next generation of lens tubes. XDLT takes your Series 3 fixtures to a new level of brightness – especially when used from the farthest distances. Reduced light leak, improved pattern projection, and near-zero chromatic aberration make these lens tubes a must-have for the largest theaters.
Technical Specs:
LEDs: 90 Lumileds LUXEON C and CZ
Max. lumens Lustr X8: 10,889
Daylight HDR: 14,214
Lumens per watt Lustr X8: 35
L70 rating: (hours to 70% output) >54,000
Colors: Deep Red, Red, Amber, Lime, Green, Cyan, Blue, Indigo
Daylight HDR: Deep Red, Red, Mint, Cyan, Blue, Indigo
Color Temperature: 1900-10,450K
Calibrated Array: Yes
Red Shift: Yes (selectable)
Beam Angle Range: Swappable lens tubes between 5°-90°
Aperture size: 6.25-17.5 in (depending on lens tube)
Pattern projection: Yes
Pattern size: A or B
Camera flicker control/Hz range: Yes / 5 kHz, 25 kHz
Input Method: 5-Pin XLR, Multiverse wireless and NFC
Protocols: DMX-512, RDM, City Theatrical Multiverse, NFC
Modes: (footprint) 5 modes (1-12 channels)
UI type: Full color display
Local Control: Yes
Onboard Presets: Yes (12)
Onboard Sequences: Yes
Onboard Effects: No
Voltage: 100-240 VAC 50 / 60 Hz
Input Method: AC via Neutrik powerCON TRUE1 TOP
Inrush: 40 A at 120 V (First half-cycle), 80 A at 230 V (First half-cycle)
Note: TRUE1 connector rated for 20 A (120 V / 60 Hz) and 16 A (240 V / 50 Hz)
Wattage: 307 W at 120 V, 305 W at 230 V
Weight: 19.55 lb with barrel
Kit Info:
- Source Four LED Series 3 Lustr X8 Fixture
- Source Four LED 19° XDLT w/ Frame
- Source Four LED 26° XDLT w/ Frame
- Source Four LED 36° XDLT w/ Frame
- Source Four LED 50° XDLT w/ Frame
- Neutrik PowerCon 15A to Edison Power Cable
- Iris for Leko
- Small Scrim Bag
- Television Motion Picture (TVMP) Adapter
- Small Wireless Threaded Antenna RP-SMA Female