Arri SkyPanel S30-C Kit
SkyPanel is a compact, ultra-bright, and high-quality LED soft light that sets a new standard for the industry. With a design focused on form, color, beam field, and output, SkyPanel represents the culmination of more than a decade of research and development of LED technology at ARRI.
The S30 is a smaller, more portable version; half the length of the S60, it is perfect for on-the-go mobile applications.
Incorporating features of ARRI’s successful L-Series LED Fresnels, SkyPanel is one of the most versatile soft lights on the market, as well as one of the brightest. Like the L-Series, SkyPanel ‘C’ (Color) versions are fully tuneable; correlated color temperature is adjustable between 2,800 K and 10,000 K, with excellent color rendition over the entire range. Full plus and minus green correction can be achieved with the simple turn of a knob, and in addition to CCT control, vivid color selection and saturation adjustment are also possible.
Unlike other tuneable fixtures, SkyPanel makes no sacrifice when it comes to light output. SkyPanel puts out a tremendous amount of light in a soft and uniform beam field. Brighter than a 1 kW tungsten soft light or a 3 kW tungsten space light, the SkyPanel S30 has more than enough light for most applications. At the same time, the lamp head is able to perform beautifully at lower light levels. This range of illumination and color gives users an unprecedented amount of control.
Technical Specs:
Lamphead:
Optical System: Soft Diffusion Panel
Light Aperture: 355 x 300 mm / (14 x 11.8 inches)
Beam Angle: 115º (Half Peak Angle)
Weight: 7.4 kg (16.3 lbs)
Handling: Aluminum Yoke, High Strength Tilt Lock, Pole Operation Option (Pan & Tilt)
Mounting: 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin)
Tilt Angle: +/- 90°
Lamphead Voltage Input: 48 V DC
Power Consumption: 200 W Nominal, 220 W Maximum
Lamphead Power Connection: Male 3-Pin XLR – 15 amp (Pin 1: Negative / Pin 2: Positive)
Battery Connector: Male 4-Pin XLR – 10 Amp (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range: 23 – 36 V DC
Battery Mode Light Output: 100% of Total Output
White Light: 2,800K – 10,000K Continuously Variable Correlated Color Temperature
Colored Light: Full RBG+W Color Gamut with Hue and Saturation Control
Color Temperature Tolerance: +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Color Rendition: CRI Average > 95, TLCI Average > 91
Green-Magenta Adjustment: Continuously Adjustable (Full Minus Green to Full Plus Green)
Dimming: 0 – 100% Continuous
Control: On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN Network Connectivity, USB-A
Remote Device Management (RDM*): DMX Setup, Hour Counter, and Standard RDM Commands
Software Interface: Ethernet – DMX Setup, Fixture Status, and Firmware Upgrade Through PC, Mac USB-A – Software upgrade via flash drive
Housing Color: Blue/Silver, Black
Ambient Temperature Operation: -20 to +45º C (-4 to +113º F)
Protection Class: IP 20
Estimated LED Lifetime (L70): 50,000 hours
Estimated Color Shift Over Lifetime: < 200 K
Certifications: CE, FCC; GS, cNRTL, CB
Power Supply Unit:
Power Supply Input Range: 110 – 240 V AC, 50/60 Hz
Power Supply Output Range: 48 V DC
Power Input Connection: powerCON TRUE1 (Edison Cables)
Power Output Connection: Female 3-Pin XLR – 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)
Weight: 2.1 kg (4.6 lbs)
Dimensions: 383 x 116 x 90 mm (15 x 4.6 x 3.5 inch)
Control: On-Board On/Off Switch
Mounting: Super Clamp Attachment / SkyPanel PSU Rail Mount
Kit Info:
- Arri Skypanel S30-C LED Fixture
- Arri Skypanel S30 Standard Diffusion
- Arri Skypanel S30 Power Supply Unit
- Arri Skypanel Power Supply Mounting Bracket
- Arri Skypanel Neutrik to Edison Power Cable
- Arri Skypanel 3 Pin XLR Extension Power Cable
- Arri SkyPanel Anton Bauer Battery Plate
- Arri SkyPanel Battery Plate 2′ Power Cable (4 Pin XLR)
- Arri SkyPanel Battery Plate 10′ Power Cable (4 Pin XLR)